Loading a Simulink model on TMS320F28035 Piccolo Micro controller

TEJ KIRAN RANGINEEDI

Other Parts Discussed in Thread: CONTROLSUITE, MOTORWARE

Hi,

Good Day.

I am Tej from Opal RT Technologies India Pvt Ltd. Recently we procured C2000 Kits for drive lab solutions.

Idea is to spin a BLDC Motor with simulink based control logic to be flashed on micro controller .This microcontroller will provide necessary firing to the switches present across the inverter board.

Please try to answer my questions

1) Can i have any link or video that will give me a start up of how to flas this contol logic ?

2) What all softwares i need to install to make this working ?

3) Can you provide me link for XDS100 driver to be downloaded ?

3) Can i take feedback information from motor to micro controller ?

over 8 years ago

0 Gautam Iyer over 8 years ago

Guru 192875 points

Hi Tej,

All you've to do is download CCS v6, controlSuite and Motorware. Also, can you please give me the board name or the TI link for the kit?

Regards,
Gautam

0 TEJ KIRAN RANGINEEDI over 8 years ago in reply to Gautam Iyer

Prodigy 20 points

Hi,
Thanks for the response.
DRV830x-HC-C2-KIT_USB_V107 is the Kit iam having.
I had gone through some where that ccs 3.3 is the only applicable version for this project and i do not know where i can get the driver xds100v1 to download

Thank you

0 Gautam Iyer over 8 years ago in reply to TEJ KIRAN RANGINEEDI

Guru 192875 points

For drivers, installing CCSv6.1 should be enough. Also, for this kit installing controlSuite should be enough.
Use CCSv6.1 for project compilation and debugging purpose.

Regards,
Gautam

C2000™︎ microcontrollers

C2000 microcontrollers forum

Loading a Simulink model on TMS320F28035 Piccolo Micro controller