F28027F LaunchPad Example_F2802xAdcSoc

hank wu

Intellectual 695 points

Other Parts Discussed in Thread: CONTROLSUITE

I'm trying the example of Example_F2802xAdcSoc.

The value of Voltage1[10] and Voltage2[10] didn't change, and the ConversionCount always zero.

Only LoopCount continues counting.

The example path is

C:\ti\controlSUITE\development_kits\C2000_LaunchPad\f2802x_examples\adc_soc

Is any thing I missed?

Hank

over 8 years ago

0 Joe Prushing over 8 years ago

TI__Genius 11951 points

Hi Hank,
I presume you are setting a breakpoint (for example in the adc_isr) for viewing the values of Voltage1/2?
Regards,
Joe

0 hank wu over 8 years ago in reply to Joe Prushing

Intellectual 695 points

Hi Joe

I found the values of Voltage1/2 not changing whenever I setting breakpoint in adc_isr or not.
Do I need to put any voltage on the ADCINA4 or ADCINA2?

Regards,
Hank

0 Gautam Iyer over 8 years ago in reply to hank wu

Guru 192875 points

Hi Hank,

Can you try with this code: C:\ti\controlSUITE\device_support\f2802x\v129\DSP2802x_examples_ccsv4\adc_soc
Its pretty much working at my end.

Regards,
Gautam

0 hank wu over 8 years ago in reply to Gautam Iyer

Intellectual 695 points

Dear Gautam

Yes! It's works!

Thanks your suggest, I import the project below, and works!
C:\ti\controlSUITE\device_support\f2802x\v230\f2802x_examples_drivers\adc_soc

Hank

0 Gautam Iyer over 8 years ago in reply to hank wu

Guru 192875 points

Excellent Hank!

Goodluck & Regards,
Gautam

0 Joe Prushing over 8 years ago in reply to Gautam Iyer

TI__Genius 11951 points

Hank, thanks for the feedback, I've put in a bug report to have someone look into the Launchpad example.
Regards,
Joe

C2000™︎ microcontrollers

C2000 microcontrollers forum

F28027F LaunchPad Example_F2802xAdcSoc