SCI Communication

Dharmendra Savaliya

Hello,

if we want to communicate to different TI Controller Using SCI Communication ...

if we have minor change in hundreds will this affect to our communication ???

we are not getting correct DATA ?

as Tx is at 9588 kbps & Receiver at 9625 kbps ...

Thank You ..

0 Gautam Iyer over 8 years ago

Guru 192875 points

Hi,

Dharmendra Savaliya said:
if we have minor change in hundreds will this affect to our communication ???

This totally depends on the SCI/UART module of the controllers. They would've their specific baud rate deviation limits.

Dharmendra Savaliya said:

as Tx is at 9588 kbps & Receiver at 9625 kbps ...

This very well seems fine. So is the data corrupted? Also, do you've any level shifters or direct TTL connection?

Regards,

Gautam

0 Dharmendra Savaliya over 8 years ago in reply to Gautam Iyer

we are using direct connection Tx-Rx.

main problem posted at link below

https://e2e.ti.com/support/microcontrollers/c2000/f/171/t/473531

thank you sir

0 Gautam Iyer over 8 years ago in reply to Dharmendra Savaliya

Guru 192875 points

I guess the other experts have taken care of your query :)

0 Dharmendra Savaliya over 8 years ago in reply to Gautam Iyer

Yes sir problem is solved...

Thank You.

0 Gautam Iyer over 8 years ago in reply to Dharmendra Savaliya

Guru 192875 points

That's Great! David M. Alter is the BESTEST of BEST :)

Goodluck & Regards,
Gautam

C2000 microcontrollers forum