help ! Problem in interfacing matlab simulink with c2000 f28027 using CCS V6

Muhammed Adel

0 Gautam Iyer over 7 years ago

Guru 192875 points

Hi,

Did you have a look here on setting up Simulink: e2e.ti.com/.../484814

Regards,
Gautam

0 Brian McKay over 7 years ago

What version of MathWorks tools and CCS are you using? To me, it looks like the configuration isn't quite complete.

Try >> targetupdater at the MATLAB command line to double-check your configuration.

-Brian

0 Muhammed Adel over 7 years ago in reply to Brian McKay

Iam using Matlab 2016 a and CCS V6.00

0 Brian McKay over 7 years ago in reply to Muhammed Adel

Did you try the targetupdater command to verify your installation? Select CCSv6 and confirm all the paths to the tools are there and correct.

-b

0 Muhammed Adel over 7 years ago

Thanks all i could sole the problem. the problem is that i must install code generation tool v 6.4

C2000 microcontrollers forum