CCS/Tms320f28377D: Configure RS485

Geet Jain

Part Number: TMS320F28377D

Tool/software: Code Composer Studio

I am new to UART , can you please help me in how to configure RS 485 in microcontroller . Please correct me if I am wrong.

over 6 years ago

0 Sean Bigley over 6 years ago

TI__Genius 17175 points

Geet,

I'm writing to let you know that a C2000 team member has been assigned to your post and should be answering shortly.

Sean

0 Sal Pezzino over 6 years ago in reply to Sean Bigley

TI__Mastermind 32995 points

I am unfamiliar with RS 485. I am not sure if our SCI supports this.

I will request another engineer to look into this.

sal

0 Brett Larimore over 6 years ago in reply to Sal Pezzino

TI__Guru 57255 points

Hi Geet,

In a C2000 device, like the F28377D, the SCI peripheral is used to communicate UART.

A RS232 or RS485 transceiver is then typically used with the C2000 device (and its UART) to create off-board connections.

TI has many RS485 transceivers in its portfolio and which is most applicable will depend on your exact needs. For choosing a specific transceiver, I might recommend posting a question to the Industrial Interface forum:
https://e2e.ti.com/support/interface/industrial_interface/

Hopefully this helps!

Thank you,
Brett

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/Tms320f28377D: Configure RS485