CCS/TMS320F28069: No target connection

ruediger.gerfried

Intellectual 880 points

Part Number: TMS320F28069

Tool/software: Code Composer Studio

Hello Hotline,

when I start a debug connection with "Prog_A" or "Prog_B", then all works this fine.

When I start a debug connection with "Prog_C", then I become

but Target is permanently connected.

Backround: "Prog_C" is greater then "Prog_A" or "Prog_B"

any Idea

Best Regards

Gerfried

over 6 years ago

0 Elizabeth Joy over 6 years ago

TI__Expert 5940 points

Hi Gerfried,

Have you tried power cycling the board/emulator and then launching the debug session? If it is still unsuccessful, can you take a screenshot of any error messages printed in the CCS console?

Regards,
Elizabeth

0 ruediger.gerfried over 6 years ago in reply to Elizabeth Joy

Intellectual 880 points

Hi Elizabeth,

in project/ properties/ debug /Lanch options was no mark in "Connect to the target on debugger startup".
Please see my answer to Vivek.

Regards
Gerfried

0 Elizabeth Joy over 6 years ago in reply to ruediger.gerfried

TI__Expert 5940 points

Hi Gerfried,

I read your response to Vivek in your other thread: e2e.ti.com/.../650429
Thanks for the update, glad to hear it's resolved!

Regards,
Elizabeth

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMS320F28069: No target connection