This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

[FAQ] F05 Flash: How do I convert a RAM-based project to a flash-based project?

Q: How do I convert a RAM based project to one that is flash based?

 

Lori Heustess
C2000 Software Engineering

  • A:

    This answer refers to C2000 devices which have F05 flash technology (Which devices include F05 Flash?)

    • The application note Running an Application from Internal Flash Memory on the TMS320F28xx DSP (SPRA958) describes the different aspects of converting a RAM-based project to a flash-based project.
    • There is a flash-based software example for each F05 device family in C2000Ware's device_support directory.  Each is named flash_<device>.  For example:

      • C2000Ware_<version>\device_support\f2806x\examples\c28\flash_f28069
      • C2000Ware_<version>\device_support\f2803x\examples\c28\flash_f28035
      • ...

    Specific steps taken to convert the example from RAM to flash can be found in the header of the example .c file, and in the documentation found in the C2000Ware_<version>\device_support\<device>\docs directory.

    For more F05 related FAQs refer to [FAQ] F05 Flash: Frequently Asked Questions

    Lori Heustess
    C2000 Software Engineering

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.