Other Parts Discussed in Thread: C2000WARE, SYSBIOS,
Tool/software: TI-RTOS
Dear Sir,
I have started to work with SYS/BIOS and the above given DSP. I took down the minimal SYS/BIOS configuration from new project configuration. I have done till boot my device from flash with 200Mhz. But Still, I am not sure that I did correctly or not. For this, I need to Initialize the other timer and GPIO.
Please guide me on how I make this configuration into this project.
I have downloaded the latest SYS/BIOS, XDS tool and C2000ware.
Ashutosh Bhatt