can you tell me about the content of the Safety Analysis Report? How does it help us in development? As we need an NDA, what are we allowed to do with it? If it helps in validation, can we use it for that?
Thanks in advance
With our current partitioning of documents we have the following in the Safety Analysis Report Summary:
• Summary of failure rates of the MCU estimated at the chip level• Assumptions of use utilized in calculation of safety metrics• Summary of ISO 26262 standard safety metrics at the chip level• Summary of IEC 61508 standard safety metrics at the chip level
And in addition to the above the Detailed Report includes:
• Fault model used to estimate device failure rates suitable to enable calculation of customized failure rates• Quantitative FMEA (also known as FMEDA, Failure Modes, Effects, and Diagnostics Analysis) withdetail to the sub-module level of the device, suitable to enable calculation based on customizedapplication of diagnostics
The Detailed report is bundled with the FMEDA spreadsheet which allows application specific tailoring (including temperature profile, enabling/disabling the use of individual safety mechanisms, pins and modules, etc) to derive the FIT rate specific to your application. It also lists the effectiveness of individual diagnostics, thus aiding in decision making.
We can share both documents with you once we have an NDA in place.
If a post answers your question, please mark it with the "verify answer" button.
will you please guide me through the process of signing an NDA as we are looking to use RM48 for one of our product.
The best way to move forward with this would be through your local sales organization. Let me know your location/region, if you aren't already in touch with TI sales and I will forward this request to the right channel.
Thanks for your reply, but i'm already in contact with my local sales organization and the process is already underway just waiting for the documents to be delivered.
good to hear that.
I tried to get the safety documents on your SafeTI page http://www.ti.com/ww/en/functional_safety/safeti/SafeTI-61508.html and the forms on http://www.ti.com/safetyanalysis about two weeks ago but I got no answer or confirmation yet. Do you know if something went wrong? Is there another way to get the documents? Do you know who to contact in germany?
Thanks for bringing this to our attention. Indeed it looks like something is not working fine. I am looking into this and we will provide you access to the documents shortly.
I have submitted two requests for review of the Safety Analysis Report and FMEDA but no response. Are you able to assist me in progressing this further ?
Thanks in advanced.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.