Hi all, I'm using a Hercules TMS570 HDK. I have used the FreeRTOS outside the HALCoGen and it looks like i have something missing as it is not working. I would like to know what changes am i supposed to make in tms570 source files(sys_intvecs, sys_memory etc)
Hi,
Please refer the FreeRTOS example in the HALCoGen Help file ( through Help --> Help Topic --> Examples ) . This has the snap shot of the HALCoGen settings too.
RegardsPrathap
~~~ If a post answers your question, please mark it with the"Verify Answer" button. ~~~
Hi Pratap, Thanks for your reply. By the way, my question was, to use FreeRTOS without HALCoGen. Actually, i'm trying to use FreeRTOS with ethernet application.
http://e2e.ti.com/support/microcontrollers/hercules/f/766/t/201248.aspx
http://e2e.ti.com/support/microcontrollers/hercules/f/312/t/190805.aspx
these 2 posts says, there is no integration of ethernet with FreeRTOS using HALCoGen, so i would like to integrate FreeRTOS without HALCoGen. RegardsPeter
Hi Peter,
My recommendation would be to post your questions to the FreeRTOS community for support on FreeRTOS.
http://www.freertos.org/RTOS-contact-and-support.html