Debugger tool for TMS570LC4357 RTM

Sindhu Krishna

Other Parts Discussed in Thread: TMS570LC4357

Hello team TI !

I use TMS570LC4357HDK and CCSv6. Which debugger tool supports the trace facility for RAM Trace port (RTP) and Data Modification Module (DMM) for TMS570LC4357 ?

over 8 years ago

0 Chuck Davenport over 8 years ago

TI__Guru 59540 points

Hello Sindhu:

TI offers a PROTRACE bundle that includes all the hardware needed to support trace on the LC4357HDK. It is available for purchase at this link store.ti.com/rm57l-protrace.aspx

0 Chuck Davenport over 8 years ago in reply to Chuck Davenport

TI__Guru 59540 points

Hello Sindhu,

After some additional investigation, I have discovered that the Protrace tool only supports ETM and not RTP/DMM as you originally asked about. There are, however, some additional 3rd party tools that support these features. Namely, Lauterbach, iSystem, and Vector VX1000 support RTP/DMM. For a complete list of tools that support Hercules and what features they support, you can look here www.ti.com/.../tools_software.page under "Emulators."

0 Sindhu Krishna over 8 years ago in reply to Chuck Davenport

Expert 1350 points

Thanks for the information Chuck .

Arm-based microcontrollers

Arm-based microcontrollers forum

Debugger tool for TMS570LC4357 RTM