Hello, TI Experts,
Our customer starts to design prototype board based-on TMS570LC4357-EVM(TMDX570LC43HDK).
They sent us a question about nRST-pin as follows.
If only 10k-orm pull-up resister is connected to nRST-pin, does it work properly?
Their understanding about reset-pins from data-sheet, EVM-schematic and
E2E-thread(e2e.ti.com/.../219949) as follows;
-nPORRST-pin needs external reset driven logic.
-nRST-pin needs only 10k-orm pull-up resister.
Best Regards