TMS570LS0432: Rated power specification

Kuerbis

Expert 4145 points

Part Number: TMS570LS0432

Hi Team,

Is there Rated power specification for TMS570LS0432?

Thermal Resistance is described in Datasheet 5.8 (SPNS186B)..

Is there any temperature specification which the derating is needed?

Thanks and Best regards,

Kuerbis

over 6 years ago

0 QJ Wang over 6 years ago

TI__Guru**** 186196 points

Hello Kuerbis,

The notes 1 and note 2 under the Table 5.7 (page 21) give a equation for derating.

0 Kuerbis over 6 years ago in reply to QJ Wang

TI__Expert 4145 points

Hi QJ Wang

We know that the notes 1 and note 2 under the Table 5.7 (page 21) give a equation for derating.

We want to know if we don’t need any derating till Tj=150degC.

Thanks and Best regards,

Kuerbis

0 Kuerbis over 6 years ago in reply to Kuerbis

TI__Expert 4145 points

Hi QJ Wang

Do you have any update for this question?

Thanks and Best regards,

Kuerbis

0 Kuerbis over 5 years ago in reply to Kuerbis

TI__Expert 4145 points

Hi QJ

Do you have any update for this question?

Thanks and Best regards,

Kuerbis

0 QJ Wang over 5 years ago in reply to Kuerbis

TI__Guru**** 186196 points

Hi Kuerbis,

The note 1 under the Table 5.7 says that "The typical value is the average current for the nominal process corner and junction temperature of 25ºC". The Icc at other temperature can be calculated with this formula.

The junction-to-air thermal resistance can vary greatly depending on the ambient conditions. But within the recommended operating conditions, the derating is not needed.

0 Kuerbis over 5 years ago in reply to QJ Wang

TI__Expert 4145 points

Hi QJ

Thank you!

Best regards,

Kuerbis

Arm-based microcontrollers

Arm-based microcontrollers forum

TMS570LS0432: Rated power specification