We are using MSP430F5438 microcontroller with CCS V5.1 compiler. Previously, debugging ( using JTAG = MSP-FET430UIF ) was working fine. Now, when I was trying to communicate with microcontroller through JTAG, I got the error "Security fuse has been blown". After that microcontroller seems to be locked and I was unable to communicate through JTAG. How can I unlock the Microcontroller and resume the debugging with JTAG?
Thanks in Advance.
Most likely, the "security fuse" (which is actually the contains of certain locations in the protected BSL-Flash) is not "blown". The Tool Chains have lots of problems and the error message may be totally wrong.
In the rare case when the "security fuse" is accidentally "blown" (and the error message was actually correct), the rest of BSL is probably accidentally altered too. Thus BSL will not work either and that chip is locked for good.
old_cow_yellowIn the rare case when the "security fuse" is accidentally "blown" (and the error message was actually correct), the rest of BSL is probably accidentally altered too. Thus BSL will not work either and that chip is locked for good.
Using 4-wire JTAG instead of SBW protocol, a parallel port FET instead of an USB one, or a dedicated flashing software such as Elprotronic's free "lite FET-Pro430" software may make the MSp accessible. Or attach to the BSL and mass-erase the MSP. And don't flash the same software again - first figure out what's happening and fix it. :)
_____________________________________Before posting bug reports or ask for help, do at least quick scan over this article. It applies to any kind of problem reporting. On any forum. And/or look here.If you cannot discuss your problem in the public, feel free to start a private conversation: click on my name and then 'start conversation'. But please do so only if you really cannot do it in a public thread, as I usually read all threads. And I prefer to answer where others can profit from it (or contribute to it) too.
My problem is solved by mass erase using BSL .
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.