TI E2E Community
MSP430 Ultra-Low Power 16-bit Microcontroller Forum
CC430 Gerber Files
I downloaded the gerber files for the CC430 evaluation board yesterday (http://focus.ti.com/docs/toolsw/folders/print/em430f6137rf900.html), and I had some questions about them. I need to figure out what each file is (eg top silkscreen, top soldermask, top copper, inner copper, etc...). Here is a list of the files. If anyone know what they are the help would be greatly appreciated! Thanks.
thanks for the feedback, maybe we could have made it a little bit clearer with the naming convention:
L01-04.GDO = Layer 1-4MB/MT.GDO = Solder MASK Bottom & Top PB/PT.GDO = Solder PASTE Bottom & TopSBW/STW.GDO = Silkscreen Bottom & TopFAB.GDO = vias & thru-holes (drills)
CKNOTE/DOKU01 = notes/docs
Hope that helps!
all files are in gerber format.
Detail information of gerber files:
CKNOTE.GDO : mechnical information
DOKU01.GDO : documentation of part placement RF-area
FAB.GDO : drill plan
L01.GDO : Layer 1 (DUT side) ; Top side
L02.GDO : Layer 2 (GND plane)
LO3.GDO : Layer 3 (VCC plane)
L04.GDO : Layer 4 (Bottom side)
MB.GDO : Solder Mask (Bottom side)
MT.GDO : Solder Mask (Top side)
PB.GDO : Solder paste Mask (Bottom side)
PT.GDO : Solder paste mask (Top side)
SBW.GDO : Bottom Silkscreen wide (Bottom side)
STW.GDO : Top Silkscreen wide (Top side)
Local.dsn : GerbTool database file (You only need this file with GerbTool)
Thanks for the help!
I was able to order the PCB just fine, but then the manufacturer sent me a message today saying the hole size was too small. The smallest hole on the board is 11 mil, but the smallest that the manufacturer can do is 15 mil (under their "student special"). They can do down to 10 mil, but I'll need to pay extra for it. Does anyone know if there are EagleCAD files that I can download so that I can change the hole size, or perhaps another manufacturer (currently using www.4pcb.com) that will make the boards as they are for around $66 each? Thank you!
We use Mentor Expedition for design the CC430 EM-Board. So you have no change to handle the datafile with EagleCAD.
I am trying to use these gerber files for reference for another design I am working on. I am having trouble working with the .gdo file format. I use Altium designer 6 and I can't seem to find any way to import or convert the files to a format that I can use. I tried using the evaluation version of Mentor Expedition to convert the files, but either the software can't preform that function or it is disabled in the evaluation version. I someone could point me to a free piece of software to convert the files or if you can just convert them for me that would a huge help. Thanks for any response in advance.
One way what you can do is, convert each gerber layer to dxf format. You can do that with CAM350 or Gerbview.
The most of layout software can include dxf data.
I don’t know how Altium handle DXF data.
Wer can i find Mentor Expedition (not gerber files) (.sch or .brd) design files of EM430F6137RF900
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.