TI E2E Community
MSP430 Ultra-Low Power 16-bit Microcontroller Forum
UART Putty msp430g2xx1_ta_uart9600.c example
I'm new to playing around with UART, and MSP430G2231I'm trying to setup the example UART code (msp430g2xx1_ta_uart9600.c) with Putty as the hyperterminal (With the COM3 selected)But the program sends the first byte of a string then gets caught in the while loop, ensuring last char got transmitted.
Putty doesn't receive anything, and nothing can be inputted. I'm not sure whether it's a Putty problem or an MSP problem.Many thanks, code examples found here (http://www.ti.com/lit/sw/slac463a/slac463a.zip)Daniel
Scratch that, Rookie error, copied code in but didn't update the chip in the project.All working :)
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.