My WAVEFSV1, WAVEFSI1 and WAVEFSI2 is stuck at zero 0x0000 all time in MSP430FE423A microcontroller.
I can assure that ESPEN bit in ESPCTL is set to '1' (thus ESP430 is enabled)
ESPSUSP bit in ESPCTL is reset to '0' (thus ESP430 is not suspended).
I am giving 1.2Vp-p, 50 Hz signal from signal generator on the I1+/-, I2+/-, V1+/-.
I dont know how to debug. What else needs to be checked and how? ADC? Any other control register?
Thanks in advance for advise,
In my further trial and error I found that,
When my ESPEN bit in ESPCTL gets set to '1', my REFON bit in SD16CTL gets reset to '0'.
Why that's happening? How to stop it?
Thanks in adv,
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.