• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 78 subscribers
  • Views 439 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP-GANG software missing image name. Rev 01.01.11.

Bruce Kernes
Prodigy 40 points
Other Parts Discussed in Thread: MSP-GANG

I updated the MSP-GANG Programmer software on my PC to rev 01.01.11 and downloaded the DLL firmware into my programmers. The new rev seems to have resolved a previous issue but now the project name in the Programmer's Internal Image Memory window only displays the file size and date. The project name is missing. There are 8 images in my programmer and it isn't possible to identify them from the file size and date. The programmer's window displays only the 16 character project name.

Is the display right justified or did the project name get left out of the link?

Thanks!

  • 0
    TI__Guru 68116 points
    Hi Bruce,

    I will look into this and get back to you as soon as I have more information. Thanks for reporting this.

    Regards,
    Katie
  • 0 in reply to Katie Pier
    TI__Guru 68116 points

    Hi Bruce,

    We have been able to reproduce the issue and found the root cause - it will be fixed in the next revision of the firmware. Thanks again for reporting the issue!

    If this is holding up your production line, please send me a private message and we can talk about if there's a way we can help you get past this in the near term before the next release.

    Regards,

    Katie

**Attention** This is a public forum