This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Cannot flash and debug code by using MSP FET.

Other Parts Discussed in Thread: MSP430G2553, MSP-FET

Hi everyone,

Below is my diagram. I used to MSP FET to flash my program to MSP430FR2x:

Plz help to verify my diagram.

CCS notify : "Error connecting to the target: Unknown device"

(I have done when flashed to MSP430G2553 on Launpad, JTAG mode)

**Attention** This is a public forum