Error using MSP430F5528 driverlib in IAR

Arnab Chakraborty

Other Parts Discussed in Thread: MSPWARE, MSP430F5528

When I try to use driverlib for using the APIs in programming MSP430F5528 the code is not getting built. I am attaching the error message screenshot. I have installed the MSPWare and followed the guidelines in your userguide for creating a driverlib project but still I am getting the error. Please assist me in resolving the issue.

Thanks

Arnab

over 8 years ago

0 Arnab Chakraborty over 8 years ago

Intellectual 635 points

Any updates in this?

Arnab

0 Katie Pier over 8 years ago in reply to Arnab Chakraborty

TI__Guru 68116 points

Hi Arnab,

No screenshot appears in your post, so it's hard to know what your issue is. Can you please see this guide for attaching images on the E2E and try again? e2e.ti.com/.../149.4-3-inserting-an-image-on-e2e

Regards,
Katie

0 Brian Boorman over 8 years ago

Guru 25210 points

As Katie already mentioned, you didn't attach a screenshot nor copy/paste the error message text from the IAR build status window. (Note that copying/pasting the text is sufficient for things like this).

In addition, it is helpful to also tell us what version of Driverlib you have and which version of IAR you are using. I say this because in some cases there are Driverlib/IAR version dependencies.

0 Arnab Chakraborty over 8 years ago in reply to Brian Boorman

Intellectual 635 points

0 Arnab Chakraborty over 8 years ago in reply to Brian Boorman

Intellectual 635 points

Hello Brian

I have attached the screenshot..Please have a look..Sorry for the inconvinience caused.

Thanks
Arnab

0 Brian Boorman over 8 years ago in reply to Arnab Chakraborty

Guru 25210 points

You still didn't reply as to which version of IAR you are using, but I suspect it is older than 6.30

Your answer is in this thread from last week: e2e.ti.com/.../434578

0 Arnab Chakraborty over 8 years ago in reply to Brian Boorman

Intellectual 635 points

Hi Brian

I would be able to tell you the version information tomorrow..Meanwhile, I will try out the suggestions provided in the other forum that you directed me. Thanks for your assistance..

Thanks
Arnab

0 Arnab Chakraborty over 8 years ago in reply to Brian Boorman

Intellectual 635 points

My problem was solved with the installation of IAR version 6.30. Thanks for your assistance.

Thanks

Arnab

0 Kasthuri Annamalai over 8 years ago in reply to Arnab Chakraborty

TI__Expert 3120 points

Arnab,
Please use the official tool IAR 6.30 dependency mentioned in the release notes. I just checked with the tools/header files team. The generic file is not packaged with old versions of IAR. Sorry for the inconvenience.
Thanks,Kasthuri

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

Error using MSP430F5528 driverlib in IAR