• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 79 subscribers
  • Views 631 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430i2040 of power consumption during reset

da
Expert 2780 points
Other Parts Discussed in Thread: MSP430I2040

Hi

My customer use MSP430i2040. 

They want to know MSP430i2040 of current during reset. (min/typ/max)

They are in the power of design, we want to know the amount of current required.

Regards,

Da

  • 0
    TI__Mastermind 33805 points
    Hi ,

    This information in not usually provided on the datasheet. However, using the EVM I was able to ground the RST pin to cause a POR and measured a current of 0.4mA.
    Your customer can confirm this by doing the same thing with their board.

    Regards,
    Charles O
  • 0 in reply to Charles Oladimeji
    TI__Guru 56685 points
    Da,

    Please also keep in mind that the current consumption via Reset can vary wildly, depending on board layout. This is due to the fact that pins loose their states during reset and enter a floating state. This can cause increased current consumption during the time pins are floating.

**Attention** This is a public forum