E2E Maintenance Alert: Please be aware that we are updating our site today at 3 PM CST. During this time, users will be able to browse current site content and perform searches to find your solutions. We expect the Maintenance to be completed by 7 PM CST.
TI E2E Community
MSP430 Ultra-Low Power 16-bit Microcontroller Forum
MSP430 LaunchPad - Mac OS X
Sorry for reopening this answered topic.
I could not get the TUSB3410 driver to work with the Launchpad on Mac OS X. I recompiled the driver with the correct product/vendor/bcddevice ID.
Using the USB prober tool from Apple, I saw that the system looked up com.ti.VCPSerial and found that all 3 IDs matched. The final score was 100000 with a wildcard of 0.
In the debug version of the driver, I saw a lot of "timing out" messages - in the end, the tty ports were not created. For reference, the Launchpad's FET430UIF has a device id of 62514 and a bcddevice of 256, with only 1 bcdconfiguration.
Please help me with this if possible.
The TUSB3410 on the launchpad (and also the EZ430-RF2500 and Chronos) does not contain a "normal" serial port of the sort that the TI-distributed VSP driver uses (and is used on the EZ430-F2013) It has custom software that implements a HID device for use bye spybiwire, and a CDC ACM serial port for the serial port (which is not done in a way that the Mac seems to like.) You should be able to get debug/load working by following the instructions on the mspdebug site ( http://mspdebug.sourceforge.net/faq.html ), but I think the serial port is still an unsolved mystery.
I'm looking forward to the day when that whole rather kludegy USB/JTAG interface is replaced with one of the new USB-capable MSP430 cpus. But I'm not holding my breath.
sad to say, but there is NO official Apple OS X support for any MSP430 tool at the moment. Look at http://processors.wiki.ti.com/index.php/MSP430_LaunchPad_(MSP-EXP430G2) ; there is a link which will give you some (unsupported info) how to set up a GCC toolchain on OS X (http://processors.wiki.ti.com/index.php/MSP430_LaunchPad_Mac_OS_X).
Thanks for the info, westfw and BUGS. Special thanks to westfw for the codeless kext which got the HID interface working.
I really did try by modifying Apple's USBCDC.kext to include the product/vendor ID for the launchpad (since other devices like the Sharp Zaurus which expose a CDC/ACM are listed there), but still no luck. Looks like I have to use Linux for non code limited usage.
As an aside, I was trying to use the TUSB3410 driver by Dan. I am getting timeout issues, which probably means an unsupported chipset/firmware.
I noticed some firmware images in the FWImages directory in the driver sources - Is it wise to either use the 3410 image provided to flash the launchpad or dump the launchpad's firmware and recompile the driver? Has anyone tried that?
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.