MSP430FR2676: Runtime Re-Calibration

Jonathan Fabry

Prodigy 20 points

Part Number: MSP430FR2676

Hello,

how does the Runtime Re-Calibration algorithm performed?

How long does the measurement interrupted?

How does the value LTA determined and changed?

These algorithm information are important for me to create a risk analysis using in safety environment.

Best regards,

Jonathan F.

over 4 years ago

0 Yiding Luo over 4 years ago

TI__Expert 5490 points

Hello Jonathan,

You can find all the information on CapTIvate™ Technology Guide: http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/CapTIvate_Design_Center/latest/exports/docs/users_guide/html/CapTIvate_Technology_Guide_html/markdown/index.html#captivate-tm-technology-guide

Runtime Re-Calibration: http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/CapTIvate_Design_Center/latest/exports/docs/users_guide/html/CapTIvate_Technology_Guide_html/markdown/ch_glossary.html#run-time-recalibration

Measurement Time:http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/CapTIvate_Design_Center/latest/exports/docs/users_guide/html/CapTIvate_Technology_Guide_html/markdown/ch_glossary.html#time-estimation

LTA: http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/CapTIvate_Design_Center/latest/exports/docs/users_guide/html/CapTIvate_Technology_Guide_html/markdown/ch_glossary.html#lta-filter

You can also find the information about each of the parameters in CapTIvate Design Center. We do have explanation of every parameters in CapTIvate Design Center GUI.

Thanks,

Yiding

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430FR2676: Runtime Re-Calibration