Tool/software: Code Composer Studio
I am using TM4C1294NCPDT controller and want to interface device to it using bluetooth. Provide the code for it.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software: Code Composer Studio
I am using TM4C1294NCPDT controller and want to interface device to it using bluetooth. Provide the code for it.
Hitesh Mankar said:... want to interface device to it using bluetooth. Provide the code for it.
Are not such "Bluetooth devices" interfaced via "several, differing methods?" UART, SPI, i2C - all come to mind.
SPI & I2C are generally "predictable" in their required signal levels - such proves, "not the case" for UART. And - the mismatch of such "levels" - when the Bluetooth device employs a, "UART line driver" - and (those boosted signals) "direct connect" to their MCU's UART pins - too often proves "destructive" to their TM4C (or any) MCU!
In light of this report - might it be best for you to (somewhat) describe the "specific" interface required by your chosen, Bluetooth device?
Lastly - your wording, "Provide the code" registers as, "Too Direct - even Commanding" - which is unlikely to be appreciated - by many here. (especially as you have, "Launched a request" - for an (unusual) level of "Service!" ... i.e. "FULL SERVICE!")
You do, "express your want" - yet absent is your recital of (any), "Efforts you've already made" - in your own behalf. Many/most here prefer, "Guiding Requesting Posters" - rather than, "Doing ALL of their work" - thus "depriving posters" of their, "full/proper" Learning Experience...