This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

XDS-100v2

Hi,

Please help to address below query.

we have XDS-100v2 with us. This we are using for the TMS2800 DSP and planning to use the same for Tivia TM4C129 controller in the new project. Please let me know how to map JTAG pin outs of XDS-100V2 to ARM Cortex-M4.

Rgds,

Uma Mahesh

   

  • Hello Uma,

    The following link is the starter

    processors.wiki.ti.com/index.php/XDS_Target_Connection_Guide

    Please note that TM4C devices have 5 signals that need to be connected to the debugger, TCK, TDI, TMS, TDO and RST_N pin. The remaining signals have to be carefully connected to the GND or VCC

    Regards

    Amit