Tool/software: TI-RTOS
Hi all,
i am working on a new platform with TM4C129X and an Blackhawk USB 560V2 debugger. CCS is 6.1.3
I wrote a small application based on the UART Driver example for TI-RTOS.
Everything works fine, but I have a problem when I try debugging in single step. In single step I get the following exception. The error occurs not in every line. The stack is large enough.
I dont know, where to find the reason.
Any ideas?
Thank you in advance
Frank
Console:
FSR = 0x0008
HFSR = 0x40000000
DFSR = 0x00000001
MMAR = 0xe000ed34
BFAR = 0xe000ed38
AFSR = 0x00000000
Terminating execution...
ROV: