This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RTOS/TM4C1294NCPDT: TI-RTOS peripheral implementation

Part Number: TM4C1294NCPDT

Tool/software: TI-RTOS

Respected sir,

I am developing my project using TI-RTOS. The peripherals needed are CAN, QEI, EPI, PWM. These peripherals are not available with existing examples in TI-RTOS.  So if these peripherals have been implemented by anyone please share. And if sharing is not possible please give me DETAILED PROCEDURE / LINKS / BLOCKS of how to add them so that i can fast track my design.

regards,

digvijay.

  • "DETAILED PROCEDURE / LINKS / BLOCKS of how to add them so that i can fast track my design."

    just ask them to write your code and finish your project for you - that's the fastest track possible.

    Short of that, I'm happy to provide you only ***rough*** procedures to get you move in the right direction.

  • Where is the damn ***  LIKE   *** button!     (cb1 feebly ... punches at air!)

    Has poster not suggested that we all,  "Slow Track" our designs - to "Fast Track" his?       On what planet?       He who "expects" - is unlikely to "receive."

  • Hi,
    You should be able to find PWM example in TI-RTOS. For others like CAN, QEI, EPI there are no corresponding drivers provided by TI-RTOS. You can use the TivaWare drivers for which which many examples are provided for them.
  • Respected sir,
    I tried to add QEI into TI-RTOS. But it is giving errors. I think i am not following write procedure. So please give me pocedure of adding new peripheral in TI-RTOS. The related console output and files are attached to following thread(newfolder.zip reply to janet).

    e2e.ti.com/.../665325

    regards
    digvijay