Part Number: DRV8323R
We have are own design with the SAM3X8E and the DRV8323R, and we use the ARUINO IDE
We can use both the DRV8323RH and the DRV8323RS depending on the placement of the resistors .
We first tested the system with the DRV8323RH and now we want to test the system with the DRV8323RS.
The question is: can you give an advice about the SPI library I can use. ( Arduino DUE )
Thanks in advance,
The DRV usues standard SPI, you can use the normal Arduino library here: https://www.arduino.cc/en/reference/SPI
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Adam Sidelsky:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.