DRV8873S-Q1EVM: Total Leakage current

Hi,
If we provide the VM=36V then what is the maximum current consumption, is it same 10mA or it will change?

Hi Ashish,

We will have to research this and get back to you.

Since you listed the DRV8873S-Q1EVM, did you want this information for the DRV8873S-Q1?
Which pins do you need this information?
Are there any pins that you do not need this information?

Hi Rick
Yes, for DRV8873S-Q1. I want to know the leakage leakage current for all pins, in sleep mode and in working condition.

Hi Ashish,

Sorry for the delay. I now have some information for you.

For the following pins you can estimate the maximum current in sleep and working mode as: Vin/62.5kOhms

EN/IN1, PH/IN2, SCLK, SDI
nSLEEP is similar but can also consume additional current as it also provides the current to the nSCS pullup. A rough estimate of the additional current is VnSLEEP/250kOhms.

Because many of these pins have pulldowns, it is recommended to set the inputs low when in sleep mode to reduce current consumption.