Dear Support team,
In case of OC latching shut down mode, how delay does it take shut down from over current detection?
Let me know the delay time from over current detect to FAULT signal asserted.
Best Regards,
Hirokazu Takahashi
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear Support team,
In case of OC latching shut down mode, how delay does it take shut down from over current detection?
Let me know the delay time from over current detect to FAULT signal asserted.
Best Regards,
Hirokazu Takahashi
Hirokazu,
The datasheet specifies an overcurrent response time of 250nS typical. This should be the same timing for the FAULT signal and the FET shut down.
Regards,
-Adam
Hello Adam-san
Thanks for your reaching out.
In case of CBC, how period will CBC work before a second protection system triggers a latching shutdown?
Best Regards,
Hirokazu Takahashi
Hirokazu-san,
The CBC should continue to operate until the device is shut down or the issue recovers.
Regards,
-Adam