I am new to panda-board and I want to test U-boot. So there is any way to test it or we cannot test it.
If anybody know how to test U-boot please guide me .As I know there is U-boot terminal and has different commands but I unable to test U-boot.
i need someone’s guide..please help me out
What specifically are you trying to test in the u-boot? You can connect to the Pandaboard over UART using a serial terminal program such as TeraTerm or Minicom. You should see prints as the Pandaboard boots into the x-loader and the u-boot. You can press a key to stop at the u-boot and then run commands from the terminal program, such as setting the bootargs and checking the memory. Here is a guide to the available u-boot test commands: http://www.denx.de/wiki/DULG/Manual (This is not OMAP-specific.)
Please click the Verify Answer button on this post if it answers your question
Be sure to read the OMAP4 and OMAP5 Forum Guidelines and FAQ
I agree with you and I know that we can use the U-boot terminal and different command given in manual and i have tried some to check what happens or i am just playing with that commands. I want to know that how we can use this command to check U-boot so we can say that our U-boot is correct or OK.
I agree that it is not related to OMAP .
The main purpose of the u-boot is to do minimal initialization in order to load and start the kernel. The u-boot also provides fastboot functionality so that you can flash the eMMC partitions of your board. There is not a way, that I am aware of, to check that "the u-boot is correct", but if your kernel loads OK and if you are able to use fastboot, then I would say that there is no issue with your u-boot.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.