pandaboard ES ver.B3 output MIPI DSI

Hi Yuan,

From where did you get the sources for ubuntu?

You have to make a changes to those files and check if a driver for your display is available.

kernel-ubuntu/include/video/omapdss.h

arch/arm/mach-omap2/board-omap4panda.c

Regards,

Boyko

Dear Boyko,

my OS downloaded from "http://www.omappedia.org/wiki/Ubuntu_Pre-Built_Binaries"

So far,my panel output is still HDMI,

I want to use five ports(CLKP CLKN DATAP DATAN GND ) to transport MIPI signal.

Or, you can tell me how to output MIPI packages by this data lanes.

THX

Hi Yuan,

If you don't have specific panel driver it is not an easy task of doing so.

You can browse for available panel drivers similar to yours and integrate them in the kernel.

Regards,

Boyko

Thanks for your reply,

So I just modify two files(/omapdss.h and board-omap4panda.c),

Could I  measure LCD out signal at Hardware J1 Connector by mipi package?

 How could I find the files which I need to modify?

And I want to ask tthe other question.

Would you give the Web which can be download android OS setup files (.img)? 

Thnaks for your reply.

I find that:

 LCD Expansion Connector “A” Pin Definitions (J1) 

how to connect my LCD module (DATAP DATAN CLKP CLKN GND) ?