This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[J6/AM57] How to handle the unused ECC pins for the EMIF module

Hi all,

   My customer doesn't need to use the ECC function of the EMIF, so how to handle the unused pins?

Yaoming

Thanks!

  • Hi Yaoming,

    Since AM571x devices does not support ECC, I assume that your customer uses AM572x device, right?

    The recommendation for unused balls is given in Section 4.1.1 Unused balls connection requirements of AM572x Data Manual.

    Best Regards, 

    Yordan