• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 629 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

XEM3001 to TX-SDK-V2

Subash M10
Intellectual 380 points
Other Parts Discussed in Thread: LM96570

MY question is, If i am going to program a controller in XEM3001 FPGA, then how to configure the pins in TX-SDK-V2 side? Is there any datasheets are available for tx-sdk-v2 board?

  • 0
    TI__Mastermind 22825 points

    Hi Subash,

    The Opal Kelly module (XEM3001) is used to command the LM96570 through its 4-wire serial interface. The kit is already configured to do this and to enable operator control through the GUI on the PC. You don't need to configure the pins on the TX-SDK-V2 side.

    The TX-SDK-V2 schematic is included in the zip file:

    File name: Sch_TX_SDK_V2.pdf

    The user guide within that same zip file has more details:

    File name: V2 Users Guide.pdf

    Regards,

    Hooman