Hi wendyThanks for ur help. Finally i solved the problem . I got the interrupts.The issue was with the proper order for mux enabling and board initialization. So that was solved.But i got a new problem.If i press any menu at the top , the menu at the down is selected and activated . can u suggest me what can be the cause for this problem.Waiting for replyThanks againThanks and regardsSubrat Kumar Ojha
Hi wendy ,
problem solved ..Problem with the co ordinates analyzing . working properly .
Subrat Kumar ojha
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.