TSC2004 Touch issue

Patrick Chen

Other Parts Discussed in Thread: TSC2004

Hello,

Customer use TSC2004 and need to add more force to let the touch panel active. Has any suggestion to let TSC2004 more sensitivity to let panel work by slight force? Thank you.

Patrick

over 9 years ago

0 Andy Liu (BMS) over 9 years ago

TI__Guru 52115 points

Hi Patrick,

I suggest your customer try some light touch screen panels, which seems to be the easiest solution.

Andy

0 Patrick Chen over 9 years ago in reply to Andy Liu (BMS)

Mastermind 8875 points

Dear Andy,

Thanks. If customer don't change panel, any other suggestion to enhance for it?

BR
Patrick

0 Andy Liu (BMS) over 9 years ago in reply to Patrick Chen

TI__Guru 52115 points

Hi Patrick,

I'm afraid no because the physical features of touch panels are beyond the control of any resistive touch controller. If the two ITO layers of a touch panel are not bent enough by force to have a mutual connection, there is no way that TSC2004 can detect the finger positions.

In addition, as far as I know, choosing a light touch screen will not necessarily increase the system cost.

Andy

Data converters

Data converters forum

TSC2004 Touch issue