TSC2046: TSC2046

Jerry Bucci

Part Number: TSC2046
Other Parts Discussed in Thread: MSP430F5659, , MSPWARE

I'm trying to download the WINCE driver for the TSC 2046, It's mentioned that it's good reference for code development, but I can't find it on the site to download?

Thanks

over 5 years ago

0 Cynthia over 5 years ago

TI__Mastermind 24940 points

We are looking into this, and will get back to you soon, Regards Cynthia

0 Jerry Bucci over 5 years ago

Expert 1530 points

www.ti.com/.../litabsmultiplefilelist.tsp

Can't download SBAC071

0 Jerry Bucci over 5 years ago in reply to Jerry Bucci

Expert 1530 points

I see that the TSC2046 has a higher speed mode where you couldn't use a SPI peripheral but would use a custom port bit routine. Just to clarify, I don't need that mode and would like to just use the SPI 8 bit peripheral using the UCB1 of the MSP430F5659. Any setup code would be appreciated.

0 Art Kay over 5 years ago in reply to Jerry Bucci

TI__Genius 17777 points

Sorry for the delay. Still checking on this. Will get back with you ASAP.

Best regards,

0 Sandeep Kasargod over 5 years ago in reply to Art Kay

TI__Expert 4405 points

Jerry,

The best place to look for example code for MSP43x is MSPWARE.

I found a few code examples of SPI mode implemented on USCI in the MSP forums:

e2e.ti.com/.../165253
e2e.ti.com/.../610400
e2e.ti.com/.../658187

Since this is a micro-controller configuration related question, you may get a more directed answer by posting your query on the “MSP Low-Power Microcontroller forum”.

Hope this helps.

Regards,
Sandeep

0 Jerry Bucci over 5 years ago in reply to Sandeep Kasargod

Expert 1530 points

Sandeep, Synthia and Art said they were looking into this regarding specifically the TSC2046 TSC.

I have the SPI routines but the TSC 2046 is a little different because it's an 8 bit control word followed by a return of 12 bits of A/D data. I can't get standard 8 bit SPI peripheral to work. There was a TI specific driver or code for interfacing to the TSC2046, but it's been taken off the site for some reason.

0 Sandeep Kasargod over 5 years ago in reply to Jerry Bucci

TI__Expert 4405 points

Jerry,

I will connect with you offline to help with this request.

Regards,
Sandeep

0 Sandeep Kasargod over 5 years ago in reply to Sandeep Kasargod

TI__Expert 4405 points

Jerry,

Could you please confirm that you have received the code in SBAC071 and that we can close this thread?

Thanks.

Regards,
Sandeep

0 Jerry Bucci over 5 years ago in reply to Sandeep Kasargod

Expert 1530 points

Yes thank you

Data converters

Data converters forum

TSC2046: TSC2046