This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TL783
Dear Kyle Van Renterghem and support member,
Because I can not reply the previous, I new post.
My customer made board of TL783.My customer make six parallel schematic Fig16 Current-Sinking Regulator.
I have a question.
Is there a way to control device variance by adding external configuration?
Best regard.Bob Lee.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Mark Sellers:
Dear Mark Sellers,
Thank you very much for reply.
The configuration was described in the attached file.
Could you check attached file?
In reply to Bob Lee62837:
I designed that LED total current is 0.7 A.But I measured 0.71A.
The resistance of TL783 is 10.8Ω,and I considered 0.117 A for each IC.（LED total current is 0.117A x6 = 0.7A）
Even if each current is measured, it changes every time.
Is there a way to control by adding external configuration?
May I ask a question?
Your answer was replied as 1.5% LDO.Where it descript in the data sheet?
The accuracy is covered here. Your application may actually be at the 0.5% accuracy as you are using less than a 5V output. Hope this helps.
I tell my customer your addvice.I will feedback you.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.