This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TPS54302
Dear experts, the TPS54302's maximum continuous output current is 3A. When the load current is 3.5A, what will happen? TPS54302 will turn off? If the TPS54302's output is short to GND, what will happen? TPS54302 has short-circuit protection and over current protection function? If this error conditions last for long time, the TPS54302 will be damaged? Or, The TPS54302 will restore to normal state when the error condition is removed? How can I calculate the exact output current that will shutdown the TPS54302? Thanks.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Andy Chen:
Dear Andy, refer to below SPEC, current limit will occur when the Maximum inductor peak current exceed High side and Low side current limit(5A and 4A)? So, maybe TPS54302 can output more than 3A when the Maximum inductor peak current does not exceed High side and Low side current limit? And TPS54302 will not be damaged when output is shorted to GND for a long time? Thanls.
In reply to Jason Hu27:
you need to design the inductor current ripple Kind with low value, say Kind=0.2, Iout=3.5A, then current peak is 3.85A which is quite close to the minimum value 4A of Max Inductor peak current.
As TPS54302 has hiccup mode OCP protection and low side curretn is also limited, so TPS54302 will not be damaged if output has continuous short.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.