This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
This thread contains information and frequently asked questions about the suite of GPC tools used for IT and/or CEDV Gauges.
List of Gauging Parameter Calculator (GPC) tools. There are several GPC tools, each with a specific purpose: 1. gpcCEDV - Determines the Compensated End of Discharge Voltage (CEDV) parameters for your cell. Used with CEDV gauges. Requires a zip archive consisting of: 6 logs in total at 3 temperatures and a config file. 2. gpcCHEM - Determines the chemID match for your cell. Used with Impedance Track (IT) gauges. Requires a zip archive consisting of: 1 log at room temperature and a config file. 3. gpcRA0 - Optimizes gauging parameters for IT gauges with respect to increased room temperature and high rate discharge performance. Requires a zip archive consisting of: 1 log of discharge at system-typical high rate, a fresh gg.csv file with only the chemID programmed and a config file. 4. gpcRB - Optimizes gauging parameters for IT gauges with respect to increased low temperature performance. Requires a zip archive consisting of: 1 log of discharge at room temperature, 1 log of discharge at low temperature, a fresh gg.csv file with only the chemID programmed and a config file.
How do I upgrade my bqstudio and EV2300/EV2400 toolchain to the latest version?
Please upgrade bqStudio to the latest 'bqstudiotest' version found here:
With your EV2300, please ensure the firmware is more recent than 3.1c. There is a known communications issue with the 3.1c firmware that will require updating with another EV2300 using the updater, found here: http://e2e.ti.com/cfs-file.ashx/__key/communityserver-discussions-components-files/180/3225.EV2300FWUpdaterUnprogDev.zip
If you also have an EV2400, please ensure that your EV2400 is running the latest firmware found here:
http://www.ti.com/tool/ev2400The bq34z100-g1 quickstart guide also covers how to set up the latest firmware and software, found here:
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.