Why we have to keep resistor at series of capacitor at Boot pin?
Because of that resistor, some high frequency noise observed at PH pin.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Why we have to keep resistor at series of capacitor at Boot pin?
Because of that resistor, some high frequency noise observed at PH pin.
Ronak,
That does not look like noise I would attribute to a BOOT resistor. Can you tell me what value you are using? Better still, can you post your schematic? Also, what is your load condition?
Ronak,
I'm going to go ahead and close this thread for now. If you need additional assistance, please feel free to respond and reopen this.