• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 223 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV61220: Inductance Type Selection

Zhihong Huang
Intellectual 1550 points
Part Number: TLV61220

Hi team，

          Is the wound inductance necessary in the design of TLV61220? Can I choose other type of inductance? what's the benefits if I select the Wound inductance in the design of TLV61220? How about the consequence without the wound inductance?

Best Regards,

Wesley Huang

 Email: wesley-huang@ti.com

  • 0
    TI__Mastermind 21565 points

    Hi Zhihong:

    If you don't have some special needs, I'll recommend you just follow the datasheet "11.2.2.2 Inductor Selection". 

    May I know why you interesting about the wound inductance? If just for learning, I may share some learning materials with you. If for specific application, I thinks it's more efficiency if you could share the spec and requirements with us and then give you some suggestions.