3630.Schematic & Layout.rarI am using PMP-530 i.e (5A) circuit for charging Li-ion Battery of 12.6V & 14.4V. Actually the circuit layout & schematic I got from TI FAE (India) . The circuit length is not suitable for our application so I redesign the same circuit of my own convenient dimension. But unfortunately the new design circuit does not working ,However I follow the same schematic as of PMP-530. I here by attach the schematic & layout of PMP-530 & my own new design schematic & layout.
Please use the bq24120 or bq24600 family of ICs.
Actually I am using Bq2954 for my project. it is not possible for me to change IC at this time.
Kindly check the ckt & help me out.
Attach a photo of the SNS pin of the IC.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.