I have a question about bq24190 D+/D- detection.
When using REG08(7:6)=01,INPUT Current Limit is mentioned 1.5A on data seat P2 Table 2.
-When using REG00(2:0)= 111, does it change to 3A?
Best regards,
Noda
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I have a question about bq24190 D+/D- detection.
When using REG08(7:6)=01,INPUT Current Limit is mentioned 1.5A on data seat P2 Table 2.
-When using REG00(2:0)= 111, does it change to 3A?
Best regards,
Noda