Our test lab find BQ24296M couldn't charge and find thw Ilimt pin voltage is 0.
What cause the pin no output?
the rrsistor is 300K, and the pin no short to ground, and resistance test is similiar to ok part.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Our test lab find BQ24296M couldn't charge and find thw Ilimt pin voltage is 0.
What cause the pin no output?
the rrsistor is 300K, and the pin no short to ground, and resistance test is similiar to ok part.
Hey Lanjie,
Just to make sure I am understanding you correctly, you are placing a 300kOhm resistor between ILIM and GND and you are not seeing the part charge?
Regards,
Joel H