Is it possible to disable the OC (1st Tier) Chg and Dsg?
The customer requires that threshold is 20A and time is 5s.
Are there any good method?
Close any instance of bqEVSW open.Copy the attached file to the following location (or whichever directory you installed TI bqEVSW):
C:\Program Files\Texas Instruments\bq Evaluation Software
This will give you access to the OC (1st Tier) Chg Time and OC (1st Tier) Dsg Time DF locations. To disable the features, set these timers to 0.
Thank you for your support!
I could access OC(1st Tier) Chg and Dsg Time.
Please teach me Min and Max value of these items.
They are each 1-byte timers, so the min is 0s (disabled) and the max is 255s. The EVSW may limit it to a lower a value, like 240s.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.