TI E2E Community
Battery Management - Gas Gauge Forum
Problems with AUX-File of bq78Pl116
we are using the circuits bq78PL116 and bq76PL102 in a BatteryManagementSystem 12s5p
with 200 Amps charging current und 150 Amps discharging current.To get the wide current range , we have to use a 0.25 mOhm sense resistor.
Unfortunately we don´t get an AUX-file. The AUX-tool is reporting errors
especially in the the phase were we have the 10 times "1 minute charge /1 minute rest".
Can somebody help with this issue?
PS.: I have forwarded detailed informations to ask.ti / Request Number 1-769000172
I can help you. Please attach your .csv and .ppcsv files for the aux file run.
thank You very much for the fast reaction.
A it is difficult to attach files to the forum, could you provide me an email address, where I can send thefiles to?
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.