Does bqstudio have an API interface

Yan Li29

Other Parts Discussed in Thread: BQ78Z100, BQSTUDIO

Hi, I currently use bqstudio to program and verify battery boards that contain the bq78z100. I am looking for a way to automate the procedure. Is there an API interface to bqstudio? If not, what is the recommended way of doing it? If through firmware, is there sample code on how to unseal the flash and program the flash?

Thank you

-Yan

over 7 years ago

0 -Terry over 7 years ago

TI__Expert 3990 points

Hi Yan,

On some of our devices, we provide a flashstream file (bqfs) that is easily converted to host-based bus transactions in your own code. Unfortunately, we have not extended that to this device at present. There may be a way to use bqStudio to accomplish what you want, let me check more on that and get back to you.

Thanks,

Terry

0 Yan Li29 over 7 years ago in reply to -Terry

Expert 1015 points

Thanks for the sample project Terry.

Yan

Power management

Power management forum

Does bqstudio have an API interface