BQ20Z45-R1

user5099999

Other Parts Discussed in Thread: BQ20Z45-R1, BQ40Z50-R2

It is supposed to use BQ20Z45-R1 with little resistance in sense of sensation (to reduce heat losses). Here training.ti.com/troubleshooting-common-multi-cell-gauge-issues.
it is recommended to configure hidden parameters. Update the ENCR file. Where and how to get it.

over 6 years ago

0 Bryan Kahler over 6 years ago

TI__Mastermind 25955 points

Hi User5099999,

Please try using the software attached in this thread: e2e.ti.com/.../41934

Also, if you are starting new development, it is recommended to use a newer gauge that is not NRND, such as the bq40z50-R2.

Sincerely,
Bryan Kahler

0 user5099999 over 6 years ago in reply to Bryan Kahler

Prodigy 30 points

I have already installed this software. But it is not possible to configure the hidden parameters max capacity error and DOD capacity error. To access them you need an ENCR file from the developers from you.

0 Bryan Kahler over 6 years ago in reply to user5099999

TI__Mastermind 25955 points

Hi user5099999,

Private values cannot be modified.

Sincerely,
Bryan Kahler

Power management

Power management forum

BQ20Z45-R1