Welcome to the Battery Management Section of the TI E2E Support Community. Ask questions, share knowledge, explore ideas, and help solve problems with fellow engineers. To post a question, click on the forum tab then "New Post".
Q: bq24031, ISET2 pin by 1567918
I know that ISET2 pin has the function which can select USB100 or USB500 when USB input is present and PSEL=LOW. This is mentioned in datasheet.
What I want to know is about the function of ISET2 pin when AC input is present and PSEL=HIGH. Does bq24031 have the same function as bq24032A and bq24038 or not?
If it doesn't have, can I open ISET2 pin when USB input is always absent (no used in system)?
A: Re: bq24031, ISET2 pin by 10449
The bq24032A and bq24038 are the only two ICs that have the "half-charge" functionality. The bq24031 does not have the "half-charge" function. For the bq24031, when AC is present and PSEL=H, the charge current is controlled by the ISET1 pin. ISET2 does not affect the charging current, so it can be pulled either low or high. I do NOT recommend leaving ISET2 open or floating. ISET2 is a digital input to an IC, so good design practice is to terminate the pin high or low.